Plastic Machine ABS/PLA Filament Extrusion Line

Feature:

I . Before produce extruding filament ,we will dry ABS and PLA for a enough time (3-5 hours).

II. Mix with colors masterbatch or colors powder, all which .certified with ROHS.

2.Production process:

I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate faster or slower to make diameter range at acceptable.

1. AC motor, hard-face-of-tooth transmission system, imported bearing with cooling system, china heating organ

2. Material for barrel and screw :38CrMoAlA,made through nitriding treatment, depth of nitriding for screw is 0.5-0.7mm, rigidity(HV) 800-950,roughness of the surface 0.8. depth of nitriding for screw is 0.5-0.7mm, rigidity(HV) 940.

3. Force-wind cooling system for screw and barrel, drawing air system.

4. With slippage changing speed

Plastic Machine ABS/PLA Filament Extrusion Line--data sheet:

Plastic Machine ABS/PLA Filament Extrusion Line --pictures

1.Single screw extruder

2. water cooling tank

3.Haul-off machine

4.Double-station coiler

ABS/PLA Filament Extrusion Line ---final product sample:

--All the important electrical elements use the world brand ,such as Schneider, Yaskawa,Simens,Omron, ABS, etc.

---Material of screw and barrel: 38CrMoAlA Azotizing on surface 0.4~0.7mm Rigidity: above 700 HV.

---Technics adopted from Germany, we have cooperation with engineers abroad.

---Steady function and long-time life , easy to handle.

If you are interested in our machines and want to know more information about our machines,please do not hesitate to send your inquiry to us,we'll try our best to serve you.

Hopefully we can succeed in cooperation and establish long term business relationship.

Best regards.

Amy Su