150T High precision horizontal Plastic Iinjection plastic machine

1)Technical Parameter:

MACHINE MODEL	XT-H150
INJECTION UNIT	UNIT	A	B	C
SCREW DIAMETER	MM	36	40	45
SCREW L/D RATIO		24.4	22	19.6
THEORETICAL SHOT VOLUME	CM3	214	264	334
INJECTION WEIGHE(PS)	G	194	240	304
INJECTION RATE(PS)	G/S	93	115	145
PLASTICIZING CAPACITY(PS)	G/S	13.4	16.5	20.9
INJECTION PRESSURE	MPA	228	185	146
SCREW SPEED	RPM	0~225
MOULDING UNIT
CLAMPING FORCE	KN	1500
SPACE BETWEEN TIE BARS(WxH)	MM	450x420
MAX. MOULD THICKNESS	MM	480
MIN. MOULD THICKNESS	MM	150
MOULD PLATE STROKE	MM	400
EJECTOR STROKE	MM	130
EJECTOR FORCE	KN	35
NO. OF EJECTOR	PC	5
OTHERS
MAX. PUMP PRESSURE	MPA	16
PUMP MOTOR POWER	KW	15
HEATING POWER	KW	7.55
HYDRAULIC TANK CAPACITY	L	280
MACHINE SIZE(LxWxH)	M	5.1x1.36x1.85
MACHINE WEIGHT	T	4.5

2)Main features of the Machines:

High speed system response and short molding cycleLargely decrease system oil temperatureReduce mold open and close crash to extend service time of machine and mold tool.To extend service life of oil piping system, to reduce maintenance possibilities and save maintenance cost.Higher requirement for hydraulic oil; provides with imported high quality oil strainer.

3)Following is the essential information of mold, for your reference.

factory supply all kinds of pipes and fittings mould 2013 pvc pipe fittings making machinery mold

Name	Reliable and durable pipe fitting mold
Mould material	45#, 50#, P20, H13, 718, 2738, NAK80, S136, SKD61 etc.
Mould base	LKM, HASCO etc
Cavity	Single/multi
Runner	Hot/cold
Design software	UG, PROE, CAD, CAXA etc.
Plastic material	PP, PC, PS, PE, PU, PVC, ABS, PMMA etc.
Mould life	300,000-3,000,000 shots
Delivery time	15-60days
Specification	Depends on customer's requirements.

4.Application of plastic injection machine

5.About workshop

6.Main parts of plastic injection machine

Clamping Unit

* New Design compact 5-point fast cycle, rigid toggle system

* Mechanical, electrical mold safety, interlock device

* Low pressure mold protection device

* Multi stage mold open/close pressure& speed control

* Multi stage, multifunction hydraulic ejection control

* ntensified wear-resistant supporting tracks for movable platen

* Automatic toggle greasing system by central lubrication device

* Mold open/close brake circuit

Hydraulics

*High-capability servo motor dynamical control system

*By-pass oil filter

*Oil temperature upper and lower limit alarm

*Oil pre-heating function

*Oil tank level

*Dirty oil suction filter alarm(250T)

*Oil cooler water temperature control valve

Injection Unit

*Twin cylinder balanced injection system

* Multi stage injection phase pressure, speed& position control

* Multi stage holding phase pressure, speed& time control

*Multi stage plasticizing pressure, speed& position control

*Time or position control holding changeover

*Injection cushion position monitoring function

*Potential meter for injection

*Plasticizing cold start prevention function

*Purge cover(with safety switch)

Electronics

*Robot interface

*Unattended running operation lock switch

*STN color screen for graphic display(With multi-language select)

*Mold date storage 35 sets of internal mold memory

*Molding condition monitoring function

*Abnormal alarm function

*Barrel temperature monitoring function

*Electric motor safety protection device

* System hardware I/O testing function 3 sets of auxiliary power outlets for auxiliary equipment

7.Packing

8.Our company