internal combustion engine test equipment

1. Introduction of internal combustion engine test equipment

internal combustion engine test equipment is the integrated equipment of temperature, crush and voltage acquisition, which is suitable for single cell of lithium-ion battery, batteries, batteries of safety special testing equipment, according to the Japanese industrial standard JISC8714:2007 5.5 terms and IEC62133-2012 8.3.9 test requirements to design and produce.

internal combustion engine test equipment

2. Function of internal combustion engine test equipment

internal combustion engine test equipment is a new generation of aircraft of the company based on the original universal material testing machine series models, the aircraft during the whole test process uses fully digital control, and Japan Panasonic ac servo drive system, besides, arc tooth synchronous belt deceleration system and high precision drive screw drive, with the speed and position and a variety of control ways; the machine is easy to operate, with high precision, wide speed range and high sampling frequency, can be equipped with multiple sensors and fixtures, with the function of one machine to complete more testing machine.

internal combustion engine test equipment

3. Main technical parameters of internal combustion engine test equipment

The temperature control system software of internal combustion engine test equipment

Controller: TEMI880 programmable temperature and humidity controller of color, touch and intelligence

(1)Brief Introduction:

With LCD of touch faceplate in Chinese and English, dialogue-type interface for data input, programmable temperature and humidity, 17-segment adjustable backlight, curve display, setting value/displayed value curve. It is able to indicate various alarms respectively; in case of any malfunction, it is able to indicate and eliminate such malfunction and eliminate the misoperation. There are multi-group PID control functions and precise monitoring function and such functions are indicated on the screen in the data form.

(2)Specification:

a. Display: LCD of 320X240 point and 30 lines X 40 characters

b. Precision: temperature ±0.1°C+1digit, humidity ±1%RH+1digit

c. Resolution: temperature ±0.1, humidity ±0.1%R.H.

d. Temperature slope: 0.1~9.9, can be set as needed

f. Input signal of temperature and humidity: PT100Ω X 2(dry bulb and wet bulb)

g. Temperature transformation output: -100~200°C relative to 1~2V

h. Humidity transformation output: 0~100%RH relative to 0~1V

i. P.I.D control output: one group for temperature, one group for humidity

j. Power supply:AC85V~264V RS-485 and RS-232 computer on-line function and on-line software (with software presented as a gift)

k. Data memory EEPROM (can be saved for more than 10 years)

(3)Display Function:

a. Dialogue-type interface for data input, screen of direct touch selection

b. Able to directly indicate the setting value (SV) and the actual process value (PV) for the temperature and humidity (indicated in Chinese and English)

c. Able to indicate the program No., stage, remaining time and circulation times performed at present

d. Able to accumulate the running time

e. Indicate the setting value of temperature and humidity program with curvilinear figure, with the performing function of real-time indicating program curve

f. With editing interface of single program, able to directly input the temperature, humidity and time

g. With stand-by and alarm function of top and bottom limitation, 9 settings of P.I.D parameters, P.I.D automatic calculation, wet and dry bulbs of automatic correction

(4)Program Capacity and Control Function:

a. Available program groups: 120 groups

b. Available program segments: totally 1200 segments

c. Repeatable performing commands: each command up to 999 times

d. Production of program by using dialogue type, with such functions as edit, delete, insert etc.

e. Program segment time setting 0~99Hour59Min

f. With program memory of power failure, automatically start and continue to perform the program function after power recovery

g. Able to indicate the curvilinear figure at real time when performing program

h. With functions of date and time adjustment, appointed starting, closing and interface lock

The picture of internal combustion engine test equipment

The production workshop

The factory

The exhibition hall

The exhibition

Certificate of the company

Our partner

Our team