19D-X835 Smart Multi-function Smart Power Meter modbus Energy Meter,CE Approved digital panel meter

BRIED INTRODUCTION
Smart X835 is a top newgeneration intelligent panel meter, developed on ARM processor and
used not only in the electricity transmission and power distribution system but also in the
power consumption measurement and analysis in high voltage and low voltage intelligent
power grid.

FEATURES

High Sample Rate
(the synchronous sampling rate reaches as high as 6kHz)

Realtime Operation
(within 2ms after very cycle, the meter can liquidate all the RMS value,
power and other parameters to meet the requirement of protected-level operation)

High Communication Rate
(RS485:1200 bps-115.2kbps)

Flexible Communication Protocol(each meter supports several usual protocol addresses or specially designed protocol addresses)

Analysis Of Higher Harmonic Measurement(2nd~60th, the harmonic algorithm accuracy:0.2%; the accuracy of the whole meter: 0.5%)

Abundant Statistical Data(the meter can calculate the demand and the maximum or minimum of the voltage, current
and power with the RTC time label to choose)

High Reliability
(the meter has passed 4 levels EMC test and can oprate with full voltage under the perceptual
powefail intelligent storage system)

MEASUREMENT ACCURACY AND RANGE

DISPLAY

Big LCD display with blue backlight
Wide temperature range
Wide angle display

COMMUNICATION
Type: RS485
Protocol: Modbus RTU/Profibus-DP/Ethernet (on request)

INPUT AND OUTPUT
4DI,2DO

POWER SUPPLY
Input: 85V~265VAC, 50/60Hz or 100V~280VDC
Power consumption: <2W

MEASUREMENT:
Voltage: V1, V2, V3, Vinavg, V12, V23, V31, VIIavg
Current: I1, I2, I3, In, Iavg
Active power: P1, P2, P3, Psum
Reactive Power: Q1, Q2, Q3, Qsum