1. Applications

♦ Ventilating

Forced ventilating, Mine ventilating, Materials ventilating and drying.

♦ Cooling and heat dissipation

Forced cooling and heat dissipation, Cement production line grate cooler cooling, Industrial equipments cooling and heat dissipation.

♦ Air purification and industrial waste gas treatment, Air filtration system, Flue gas desulfurization, Flue gas denitrification.

♦ Boiler’s air supply and exhaust (Coal-fired boiler, Biomass boiler, Garbage incinerator, CFB boiler, Stoker feed boiler…).

♦ Industrial boiler blowing air, Industrial boiler inducing air, Industrial boiler primary air, Industrial boiler secondary air.

♦ Industrial boiler waste gas desulfurization, Industrial boiler flue gas denitrification.

♦ Industrial kilns

Materials delivery of Cement rotary kiln, Lime rotary kiln, Nickel iron rotary kiln, Clay sand rotary kiln, and other various calcining kilns.

Garbage incinerator blowing air, Garbage incinerator inducing air.

Ventilating of cement mill, Coal mill and other large mill system.

♦ Energy and power

Thermal power plant, Garbage incineration power plant, Biomass fuel power plant, Industrial waste heat recovery device.

♦ Metal smelting

Blowing air of mineral powder sintering(Sintering machine), Smelting furnace and foundry furnace, Combustion of blast furnace, Blast furnace coal injection, Coal gas boosting and conveying.

♦ Gas and materials delivery

General air delivery, High-temperature air delivery, Combustible gas delivery, Corrosive gas delivery, Gas mixed with impurity delivery.

Delivery of coal powder, Particle material/ Powder material/ Fragment materials/Fiber materials.

2. Characteristics

♦ Can output higher discharge pressure, and working at high medium temperature condition, applicable to any industry condition which need to conveying high pressure & high temperature gas.

♦ Can flexibly adjust fan’s volume and pressure in running by air damper. Can also adjust fan’s pressure and volume by changing the fan speed via matching variable frequency motor.

♦ In the case of using system base, so easy for installation, no need of professionals direction.

♦ Transmission efficiency higher than belt driving’s, much lower of fan system energy loss.

♦ Flexible connection for motor shaft and transmission shaft, no need to tension or change the belt, low maintenance work.

♦ Cooling method of bearing, choosing low cost water cooling method or good heat dispersion oil cooling method according to gas temperature and running condition. Or installing BOX COOL for very high temperature medium condition to protect fan system operation reliable completely.

♦ Regarding to material of impeller and main shaft, we will choose high strength carbon steel, low alloyed steel, High temperature resistant alloy steel, High temperature resistant high strength alloy steel according to different medium temperature and running speed, ensuring the impeller and main shaft keeping reliable strength in high temperature.

♦ Can satisfy different dust loading conditions that low dust loading to a good deal dust loading, the surface hardness of impeller can reach to HRC60~70 after special processing, greatly extending impeller’s service life.

♦ Using liquid lubricating oil, no need to open bearing housing when changing or filling lubricating oil. Easy to observe the lubricating oil’s quality and stock through inspection window on the bearing housing body.

♦ Bearing housing reserves installation place for temperature and vibration sensors, can install easily of fan running monitoring device.

♦ Bearing housing adopt labyrinth type mechanical seal, unique design of spill prevention of inner, venthole design on top, commissure coated with sealing grease, completely eliminating bearing housing oil leak.

♦ Selecting high efficiency energy saving motor of Chinese leading motor manufacturer( or customer required), reliable quality, low energy consumption.

♦ The motor load can be automatically reduced when airflow resistance is increasing, to prevent motor from destroying.

♦ Customizing design according to customer’s performance requirements, and optimizing by CFD technology, energy consumption lower than same fans.

♦ Adopting high quality carbon steel manufacturing, or stainless steel and other metal materials according to customers’ requirements.

♦ Fitting tightly of parts, good sealing, ensuring no reducing of output pressure.

♦ Impeller of annealing treatment, completely eliminating structure of internal stress when welding, ensuring impeller appearance won’t occur creepage and flaw.

3. Structure

♦ Impeller Type: Forward blade

♦ Driving Mode: Coupling drivetrain

♦ System Type: Single inlet type, Overhang type.

♦ Cooling Type: Circulating Water cooling/Forced circulation oil cooling.

♦ Bearing Lubrication Methods: Oil bath lubrication/Oil circulating lubrication

♦ Basic Components:

Motor, Impeller, Impeller cone (Air Inlet), Case, Damper, Main shaft,
Bearing, Bearing housing, Pin coupling,Foundation bolt.

♦ Optional Components:

System base frame, Protective screening, Silencer, Inlet & Outlet pipeline compensator,
Inlet & Outlet flange, Damper, Electric actuator, Shock isolator, Diaphragm coupling, Fluid coupling,
Motor rain cover, Temperature sensor, Vibrating sensor, Soft starter, Inverter, Special Electrical Motor,
System monitoring Instrument, Lube system, Overhead lube tank...

Product pattern

rotor ways

it can be divide into the levo-rotation (LG) and the dextrogyrotation tow revolving way.One should regards straight from the electrical machiney,the impeller clockwise rotation is called the dextroratation air blower,and the counter clockwise rotation is called the levogy rotation air blower.The belt pulley may control veers,therefore it is not limited by the direction.

4. Performance

The following datas are only part of performance of our product.

If you can't find the datas you need, pls send us your performance requirements,

we will provide you customized design service.

Welcome to Shuangyi Environment Engineering Co., Ltd

Pls Feel Free to Contact Me:

Rita Gao

International trade manager

Tel: 00-86-531-88221053

Mob:0086-132 5569 3170/189 0640 9100

E-mail: cnfrp365 ( at ) gmail.com

Skype: cnfrp369