air conditioning spare part

----- 1/4HP condenser

1.material :copper , aluminum ,stainless steel

2.aluminum foil: hydrophilic or bare

3.fin type: louver fin or corrugated fin

4.copper pipe: diameter 7mm or 9.52mm ,inner screw thread or grooved pipe

5.spec: different size, pitch of fins can be adjusted between 2.0--3.0mm.

6.voltage :220V/1/50HZ and 380V/3/50HZ .
7.different alternative condensing fans available.
8.did gas examination under 3.0Mpa air pressure to ensure the tightness.

9.condenser type:

side-exhausted with single fan, double fan, triple fan and fourfold fan, heat exchange surface is from 2 square meter to 180 square meter

top-exhausted with double fan and triple fan, heat exchange surface is from 80 square meter to 600square meter.
10.widely used in refrigeration industry, cold room and other system.

11.Heat-exchanging coiled pipes are highly efficient,clean and dry.

12.Punched holes of almium fins are extending along "L" row. After tube expansion, they are connected closely, and thus ensure high efficiency of heat exchange.

13.The design width of this condenser is reasonable. Space between fan blade and almium fin is larger than 1/3 diameter of fan blade, in order to ensure sufficiency windward area.

14.After plastic-sprayed treatment,the shell is anti-corrosive and endurable.

15.For special-purpose products, please contact us directly.

16.This model is not within fan motor--specially note.

Note: we can supply products as per customized samples or drawing.