Gas shielded welding wire AWS A5.18 ER70S-6 welding wire

Location:
Chengdu, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

1, ER70S-6 is a copper low alloy steel wire with all position welding, widely used to welding low carbon steel and low alloy steel structure, such as ships, vehicles, bridges and buildings etc.

2,The wire has a very good welding performance and the weld metal shows lower temperature impact toughness.

3,It is mainly used for butt and fillet welding structures shipping steels and low alloy steels ,suchasships ,containers ,vehicles, engineering & construction machinery ,bridges and so on.

The tensile strength of melted metal from those carbon steel welding rods should be less than 500MPa.They are the most widely-used rods.

The are mainly used in the welding of carbon steel and low-strength low-alloy steel, such as 16Mn,09Mn2Si and etc.

422 GB E4303 equals JIS D4303

Index

Chemical Composition of Deposited Metal(%)

C

Mn

Si

S

P

0.06-0.15

1.40-1.85

0.80-1.15

≤0.035

≤0.250

Mechanical Properties of Deposited Metal

Iterms

Tensile Strength

(MPa)

Yield Point

(MPa)

Elongation

%

Impact Value(J)

0

Standard

≥420

≥330

≥22

≥27

Typical

430-490

≥330

22-32

70-115

Sizes, pieces & Recommended Current(AC or DC)

Diameter (mm)

2.0

2.5

3.2

4.0

5.0

Current(A)

40-70

70-90

90-130

160-210

220-270

Note: If the welding rods is affected with damp, it should be baked around 30-60mins at 150 .



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Chengdu Dazhonghua Welding Material Co., Ltd.
Phone Number:
  86-28-85138258
Fax Number:
 86-28-85180769