All

220V&380V usb servo for Laser industry

Location:
Wuhan, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C
Categories:
Home > Industrial Supplies > Industrial Supplies Stocks

Product Description

220V&380V usb servo for Laser industry

About our company

Wuhan Maxsine Electric Co., Ltd.was established in East Lake Development District, Wuhan City, Hubei province in 2004.Since its inception, it has been committed to provide advanced products and firstclass services to customers in the industrial automation field.Alldigital AC Servo Driver and Permanent MagnetAC Servo Motor are core products of the company. With continuous effort of the staff for nearly 10 years and technical accumulation and innovation of the technical team for more than 20 years,the company has succeeded in holding both technology leading status and the biggest market share in China. At present, the products of Wuhan Maxsine Electric Co., Ltd such as Permanent Magnet AC ServoMotor and Servo Driver have been chosen and approved by more and more customers and been widely used in the numerical control machine tools, textile machinery, packaging machines, printing machines, cutting machine, marking machines, industrial robots and many other industrial automation fields. Also, its customers have covered many domestic and international areas such as Mainland China, Taiwan, Southeast Asia Nations, India, South Africa, Russia, Brazil and

other regions.

Maxsine Products:

All-digital AC Servo Driver:

EP100 series, EP1 series, EP1C series, EP2 series, EP3 series, currently covers power range from 50 W to

5.5 kW.

Permanent Magnet AC Servo Motor:

40 series, 60 series, 80 series, 110 series, 130 series, 150 series, 180 series, currently covers torque from

0.6 Nm to 35 Nm and power from 50 W to 5.5 kw.

Introduction of EP3 Specification

1'Detailed paraters

ModelGL 1A0GL 3A0GL 7A5GL 120GL 160GL 190GL 240GH3A5GH 5A4GH 8A5GH 130GH 170
Rated output Power(kW)0.10.411.523511.5235
Rated output current(A)137.5121619243.55.48.51317
Input powerMain supply1-phase 220VAC -15%~+10% 50/60Hz3-phase 220VAC -15%
+10% 50/60Hz		3-phase 380VAC -15%~+10% 50/60Hz
Control supply1-phase 220VAC-15%~+10% 50/60Hz24VDC±15% ≥1.5A
EnvironmentTemperature

Working:0°C~ 40°C Storin:-40°C~ 50°C

Humidity Working:40% ~ 80%(non condensing) Storing:under 93%(non condensing )
Atmospheric Pressure 86kPa ~ 106 kPa
Protection Level IP20
Control Mode vector control
Regenerative Braking Built-in/built-outbuilt-out
Feedback Mode 2500 line incremental encoder or 17 bit absolute encoder
Control Mode Position, speed, torque, position/ speed,speed/torque,position/torque
Digital input5 Programmable input terminals(Optical Isolation)
Digital Output3 Programmable input terminals(Optical Isolation)
Signal Output of encoder A,B,Z Differential output,Z signal open-collector output
PolesProgrammable fractional frequency(using incremental coder)/ 1~131072P/R(using absolute encoder)
PositionInput Frequencydifferential input:≤500kHz(kpps), single-ended input:≤200kHz(kpps)
instruction modePulse+Signal,CCW Pulse/CW Pulse, Two-phase A/ orthogonal Pulse
Electronic Gear Ratio 1 ~ 32767/1 ~ 32767
SpeedSimulation command input -10V ~ +10V,input impedance10kΩ
Instructions Acceleration And Deceleration Parameters set
Instructions source analog,Internal speed instructions
TorqueSimulation command input -10V ~ +10V,input impedance10kΩ
Speed restriction Parameters set
Instructions source analog,Internal torque instructions
Special FunctionsZRN ,Gain switch,mechanical resonance wave trap, sustaining Modbus agreement
Surveillance Function Revolving Speed,Current Position,Positional Deviation,Motor Torque,Motor Current,Instructions Pulse Frequency etc.
Defensive functionOverspeed,Overvoltage,Overcurrent,Overload,Abnormal brake,Abnormal Encoder,out of tolerance etc.
FeatureSpeed Frequency Response ≥300Hz
Speed Fluctuation Rate <±0.03%(load 0 ~ 100%); <±0.02%(power-15% +10%)
Speed Ratio3.513889

2' Introduction of EP3 Models

3' Introduction of EP3 Size

Note: EP3 series has different appearance depend on different models. Please see the details on related use manual.

Pictures



This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Wuhan Maxsine Electric Co., Ltd.
Phone Number:
  86-27-87921283-812
Fax Number:
 86-27-87921290
 
Wuhan Maxsine Electric Co., Ltd.
 Hubei , China FREE
 

Resources