The brief introduction for waste tyre pyrolysis machine

We are a professional company who manufacture waste tyre pyrolysis to oil machine. We will supply you tyre recycling machine with best quality, lowest price and best after-sale service, which will makes you satisfied.

1. The 6 models are as follows:

2. Process of the whole working plant

1). Feed the reactor with raw materials through the feeding door by labor or machine and then close it tightly.

2). Heat the reactor with coal, wood or other fuels.

3). Some harmful smoke will come out along with the heating, but it can be removed by the dedusting system.

4). The smoke from the exhaust disposal system is no different from the air. The draft fan helps to inhale the smoke from the pipe and then release it into the sky more quickly.

5). The oil gas will travel from the reactor to the gas separate, in which the heavy oil and impurities will depart from the gas due to the gravity. Then the gas will continue its journey into the depositing tank for a second separation. After that, the cleaned oil gas will run into the cooling condensing pipes in the cooling pool, where the gas will convert to liquid, the oil, and then flow into the oil tank for storage.

6). There will be some waste gas in the oil tank. It will follow the pipe over the oil tank into the cooling pool for a second condensing so that the remained oil gas could turn to oil to improve the oil yield rate.

7). As for the waste gas, that cannot transform to liquid will go to the water seal and then to the furnace for burning. It is not only environment protection but also energy conservation

3. Our equipment advantages:

1) Security: our equipments have anti-blocking device and have pressure gauges, alarms and safety valves.

2) Energy conservation: recycling of waste gas to heat reactor again can save energy and thereby reducing costs.

3) Long life: hot-blast stove is long life, but not energy-saving, its consumption of energy is much greater than the repair costs of furnace. Direct-fired reactor is energy-saving but short-life. It is a contradiction. we resolved this conflict by thickening steel plate reactor of fire approach part which oxidized extremely, so we generally use the 14mm,16mm,18mm,20mm thickness of steel plate.

4) Guarantee with after sales service: quality and service is our commitment and responsibility. Your success is our aim. We do what we guarantee you. We have a good reputation in the industry.

4. End product percentage

Tyre oil 45%, Carbon black 35%, Steel wire 10-12%, Waste gas 8-10%

5. Analysis of economic benefit (take JC-D-8 for example, raw material is used scrap tires):

6. Warranty of machine

1) We will supply the foundation drawings to buyer after getting deposit.

2) The delivery time is 10-15days after getting deposit.

3) We will send engineers to install the machine when the machine reach buyer's factory. The engineer will install machine and train workers for buyer.

4) We warranty the complete machine two years. We will maintenance it all lifelong. When the machine can not run normal, the buyer can call us, we will help buyer repair it by call, if it can not be solved, we will send engineer to buyer's factory at the shortest time. If need change parts, we will supply you at bottom price.

7. port of China

FOB Lianyungang &Qingdao.

8. The machine covers area:

The machine itself cover 300 square meters (length 20M, Width 15M)

Add raw material stay, carbon black stay, big oil tank zone, workers rest room and simple office. So it takes at least 600-800 square meters.

At last, if you have any other questions, please do not be hesitated to contact us. We will try to give you best answers and best explanation.

Hope we can have good and long cooperation in near future.