Marine Stud Link Anchor Chain basic information:

1.Standard length is 27.5m per piece,we also can produce according to your requirement .

2.Material: alloy steel, generally including CM390, SM490, CM690, or aoording to your requirement

3.Grade :U2&U3

4.Surface treatment: self color, black painted, zinc galvanized, hot dip galvanized or according to customer's requirement.

5.The tension beak load conforms to National Standard.

6. Studless anchor chains. Specification: 12.5-70mm, mainly adapt to vessels, fish net tenesmus, mine, municipal engineer, new established garden decoration

7. Production process: (1) material cutting (2) heating (3) curving (4) welding (5) thorn cutting (6) pressing (7) heating treatment (8) Blind bolts (9) polishing (10) painting

stud link chain introduction:

Stud link chain is normally supplied in the grades U2 and U3.

Originally studs were added to the chain to stiffen the links preventing them from severely deforming when overloaded. They have the added advantage in that they prevent the chain from knotting up when twisted, thus avoiding problems when chain is retrieved with a windlass.

Most stud link chain is used on larger vessels and is rarely available in sizes under 12.5mm diameter.

Stud link chain is normally supplied in 'shot lengths' (27.5mtrs long) which can then be joined together using a Kenter shackle. Black bitumastic paint or galvanised finishes are available.

Continuous lengths can be made to order with optional extras ie open end links, welded swivel assemblies, D type anchor shackles.

Technical parameter: