Oval gear flow meter for oil,kerosene,diesel

Product Description

Product Description

Material Model:

Cast Iron type(A), Cast Steel type(E),Stainless steel type(B)

Type	A	E	B
Pressure(Mpa)	1.6	2.5,4.0,6.4	1.6
Temperature(°c)	-20~100	-20~100	-20~100
Viscosity(mpa.s)	2~200	2~200	2~200

Diameter: 10~200mmUniform rotator, small vibration, long working life.Typical Applications: Lubricating Oil, Epoxies, Fuels, storage tank flow meter, oil counter, tank truck flow meterDiameter:10~200mmFeatures,High accuracy, wide range.Uniform rotator, small vibration, long working life.Low sensitivity to variance of viscosity, suitable applied in be high viscosity liquid.Simple instruction, small sizes, light weight,Simple installation, no need install straight pipe section before meter.Technology specification:Accuracy class:0.5%.0.2%(-10 º C~+60 º C)Medium temperature:-20 º C~80 º C, it can reach 200 º C with radiatorExplosion-proof: ExiaIICT6Advantages: Given it's immunity to the most viscous of fluids, oval gear meter are ideally suited for measurement of viscous fluids or those with varying viscosities such as oils, syrups and fuels.Ease of installation is another advantage of the oval design. Because no straight pipe runs or flow conditioning are required, oval gear meters can be installed in tight areas where alternate technologies would failDisadvantages: Oval-gear meters are generally not recommended for water or water-like fluids, because the increased risk of fluid slippage between the gears and chamber walls. Fluids should be clean and non-corrosive, preferably medium to high viscosityTypical Applications:

•Lubricating Oil

•Greases

•High Viscosity Fluids

•Epoxies

•Polyurethane

•Fuels

•Solvents

•Chemicals

•Additives

Company Information

Our Services