Conveyors Material Handling Equipment Universal Plastic Idlers

Location:
Anyang, China ( Mainland)
Status:
New
Sample Availibility:
yes
Payment Terms:
Cash, Bank Transfer, Letter of Credit, T/T, L/C

Product Description

A. Anyang UHMW-PE (Ultra High Molecular Weight Polyethylene):

Ultra High Molecular Weight (UHMW) Polyethylene is often referred to as the world toughest polymer,it is a thermoplastic engineering plastic

with the average molecular weight more than 6.0 million. (PE only has the molecular weight between twenty to two hundred thousand.) which

is regarded as a surprised engineering plastic of excellent comprehensive capacity.

B. Advantages for UHMW-PE Chain Roller

1.Abrasion resistance

UHMWPE has abrasion resistance 10 times that of HDPE .


2.Impact resistance

UHMWPE has the highest impact strength of any engineering plastics, about three times which of nylon, two times that of PC, five times that of ABS.


3.Effective sealing system

The primary labyrinth seal prevents most of the dust to get into the bearing house, and no water could leak in.

4.Light weight and energy saving

UHMWPE rollers are only one third less in weight than steel roller, they are even lighter than HDPE roller, since they have
superior strength .Light weight and low friction result in considerable energy saving.

5.Reduced belt damage

UHMWPE shell is self-lubricant, and prevent the adhesion of any transfer material, so no damage was caused to conveyor belt.


6.Noise reduction

UHMWPE is a much better noise debase material than other materials, UHMWPE rollers generate much less noise than conventional
steel roller, they are environmentally friendly.

7.Corrosion resistance

UHMWPE roller can withstand humidity, corrosive chemicals, acids, salt and alkalis.

8.No sticking

UHMWPE could not be sticked by any material, so no conveyor material will be sticked to roller surface.

C. UHMWPE Application Areas

1. Textile Industry:

2. Chemical Industry:

3. Food Processing Industry:

4. Paper Industry:

5. Material Handling:

6. Farm Implement:

7. Mining & Metals Processing Industries:

8. Transportation:

9. Consumer Products:

10. Waste Water Treatment:

D. A parameter table for UHMWPE

Property

ASTM Test

Units Metric (US)

Typical Values

Specific Gravity

D792

gm/cm°

0.926-0.934

Tensile Strength @ Yield

D638

MPa (PSI)

21 (3100)

Tensile Strength @ Break

D638

MPa (PSI)

48 (7000)

Elongation @ Break

D638

%

350

Young's ("E") Modulus (23°C)

D638

MPa (PSI 105)

690 (1.0)

Young's ("E") Modulus (-269°C)

D638

MPa (PSI 105)

2970 (4.3)

Izod Impact Strength (23°C)

D256(1)

J/m (ft-LBS/in notch)

140 (30)

Izod Impact Strength (-40°C)

D256(1)

J/m (ft-LBS/in notch)

100 (21)

Hardness, Shore "D"

D2240

-

62-66

Abrasion Resistance

(2)

-

100

Water Absorption

D570

%

Nil

Relative Solution Viscosity

D4020

dl/gm

2.3-3.5

Density

(lbs./cubic in.)

.034

UHMW-PE Pully Idlers

Other Products:

UHMW-PE Idler:

buffer strip:

machined parts:

elevator bucket:

About us:





This member's information has NOT been authenticated or verified by importexportleads.net or any third party. Only Gold Members have completed an authentication and verification procedure conducted by third-party credit agencies.

For more information on importexportleads Gold Membership, Click here

Contact Information

Company:
 Anyang Ultrahigh Industrial Technical Co., Ltd.
Phone Number:
  86-372-2991462
Fax Number:
 86-372-2961406